Wilkerson SM2 Manual do Utilizador descarregar pdf (Página 2)

SM1 & SM2 Coalescing Filter 83-947-000

Service Kits Available

Description SM1 SM2

Auto Drain — SRP-96-027

Auto Pulse Drain RK504SY-SS —

Element (.3 Micron) SRP-96-005 SRP-96-006

Manual Drain SAP05481 SAP05481

Sight Glass — SRP-96-026

SM1 Coalescing Filter

with Auto Pulse Drain

SM2 Coalescing Filter

with Sight Gauge

Operation

1. Both free moisture and solids are removed automatically by the

ﬁlter.

2. Manual drain ﬁlters must be drained regularly before the

separated moisture and oil reaches the bottom of the bafﬂe or

end cap.

3. The ﬁlter element should be removed and replaced when

pressure differential across the ﬁlter is 69 kPa (10 psig).

Service Procedure

Caution: Shut off air supply and exhaust the pressure

trappedwithinthelterbowlbeforeservicingunit.

Caution: Touching or handling the new element section

may cause contamination, spotting, or migration of oil.

1. Unscrew and remove bowl.

2. Unscrew the ﬁlter holder from body and then remove element.

3. Clean all internal parts and bowl before reassembling.

4. The coalescing filter element should be removed and

replaced when pressure differential across the ﬁlter is 10

PSID. Differential gauges should be used to determine when

the maximum recommended pressure differential has been

reached.

5. Attach ﬁlter holder and ﬁnger tighten ﬁrmly.

6. Replace bowl seal. Lightly lubricate new seal to assist with

retaining it in position.

7. Install bowl into body and tighten; hand tight, plus 1/4 turn.

8. After servicing, apply system pressure and check for air leaks.

If leakage occurs, DO Not Operate — conduct servicing

again.

SM2 Metal Bowl

with Auto Drain

Lightly grease with provided lubricant.

Inspect for nicks, scratches, and surface imperfections.

If present, reduced service life is probable and future replacement

should be planned.

Clean with lint-free cloth.

O-Ring

Bowl

(Hand Tighten)

Auto Pulse Drain

(Finger Tight)

Element

Bowl Seal

Element

O-Ring

Bowl Seal

Manual Drain

Bowl

(Hand Tighten)

Filter Body

O-Ring

Auto Drain

(SM2 Only)

(Finger Tight)

O-Rings

Bowl

Hand Tight

O-Rings

Seal Cap

Finger Tight

Cap Seal

Screw

To rque .56 to 1.13 N

(5 to 10 in. lb.)

Screw

To rque .56 to 1.13 N

(5 to 10 in. lb.)

Sight Glass

Bowl

Hand Tight

1 2

Comentários a estes Manuais

Sem comentários

Wilkerson SM2 Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Wilkerson SM2